Globaltherm FF

Globaltherm FF

PRODUCT NAME: GLOBALTHERM - FF FLUSING & CLEANING HEAT TRANSFER SYSTEM

Globaltherm FF is a dual action flushing and cleaning fluid that will remove potentially harmful contaminants including; old/oxidized residual fluids, carbon deposits, loose debris, water and volatile light ends from your heat transfer system.

The Cleaning and Flushing Power of Globaltherm FF

Globaltherm FF is designed to remove harsh by-products of synthetic and mineral based thermal fluids. It displaces and flushes out waste to leave a clean and safe system, ready to accept a fresh charge of thermic fluid.

# Use Globaltherm FF to maintain a safer system environment
# Use Globaltherm FF to maximize performance and service of flushed or cleaned thermic fluid pipeline system.
# Use Globaltherm FF to dissolve sludge and clean your system without reduction of production time and output.
# Use Globaltherm FF to reduce downtime
# Use Globaltherm FF before recharging a system to ensure optimum efficiency and maximum performance

Globaltherm FF is also recommended to clean and flush brand-new systems before the initial fill to purge the system pipes of any minerals, lacquers or residual minerals or lacquers that have settled since the thermal fluidsystem was constructed.

# Globaltherm FF is compatible with most heat transfer fluids
# Globaltherm FFrestores system performance
# Globaltherm FFcleans and flushes heat transfer fluid system

PHYSICAL AND CHEMICAL PROPERTIES

Note: The information given in the typical data does not constitute a specification but is an indication based on current production and can be affected by allowable production tolerances. The right to make modifications is reserved. This edition supersedes all previous editions and information contained within them. Typical values should not be construed as a guaranteed analysis of any specific lot or as specifications for the product. Abbreviations: OC, open cup test; and, NTR, no test reported.

HOW TO CLEAN SLUDGE OUT OF YOUR SYSTEM

If you have sludge in your system, don’t lose hope. There are a few things you can do to save your system.
The first thing you’ll want to do is have your fluid tested. Fluid analysis will give you an indication of the system . condition and will help in determining the severity of the problem. Most major heat transfer fluid vendors offer an analysis service but independent labs can also perform heat transfer specific tests such as flashpoint, viscosity and TAN or Carbon Residue.
Now that fluid analysis has told you part of the story, it’s time to start connecting the dots. Have a closer look at your system. Sludge tends to build up in areas like expansion tanks and reservoirs. If it’s possible to access these areas, take a look for sludge deposits to give you a better idea of the scope of the problem.

System Cleaners

For systems, additive-style cleaners such as Globaltherm FF can be added to existing fluids to break down sludge build-up and seamlessly clean systems while running production. These are typically added to your existing fluid at 10 to 15% concentration. It is to be added into the thermic fluid system as you are adding just like thermic fluid and the system make sure that it reaches to main circulation system and does not remain In expansion tank. Products like Globaltherm FF can be left in the system indefinitely, while others are intended for use just prior to a fluid change. Check with your vendor for specific instructions.